Physics Mods V2.5 for ATS 1.28+ – For Manual Drivers.

Here the v2.5 of the Physics. Still in wip.

Hi guys, This physics change the transmission feel and suspension.

[UPDATE]: That is new in this update v2.5.
– Work with 4 trucks for now:
Peterbilt 389 SCS
Peterbilt 579 SCS
Kenworth W900 SCS
Kenworth T680 SCS

#For the transmission:

– Nothing has changed for the Automatic Transmission. still the same from the last update: v2.3.
– Next update will be more focus on that.

– The clutch engage at very low, but is still easy to use.
– Transmission have now some little bit of resistance.
– The RPM will take time to go down in RPM. (You are at 1500RPM, it will take more time to go at 1000RPM then stock physics.).
– More coming out for the Transmission.

#For the Suspension:

– Now you have cabin mouvement like real truck (I don’t why it was deactivated.)
– Cabin suspension work with SCS Truck for now.
– Wheel suspension travel is increase.
– OLD: Now the trailer will and roll by it self and not being one piece with the truck
– You may see the cabin moving when turning or going on something.
– Now wheel can slip, so be carefull

#Others:

– Now tires can slip, so be carefull.

– Still in WIP !

The goal is that I want to make the “worst” physics to a “real feel” physics, I never drive a real truck in real life, but I can make it from Youtube Video.

Recommended to use with a steering wheel and clutch pedal, but you can use this mod with other controlers !

I can update the mod for you if you want !

Any bug or question ? Just tell me on Facebook: https://www.facebook.com/Jad.Gang97

Credits:
SCS, oXyDe.DRIVERS

DOWNLOAD 14 KB

11 thoughts on “Physics Mods V2.5 for ATS 1.28+ – For Manual Drivers.

  1. Cabin shakes like jelly with the minimum turn of the steering wheel; suspension yet too stiff, cant feel the road and the pavement. Thanks for your hard work

    1. oXyDe.DRIVERS

      Hi, it’s still in Work in Progress, Also it’s not a powerfull physics Engine so I also limited in the physics movement.

      For the Cabin, i’m still working on it, it’s not easy to find the sweet spot.

      For Suspension, it’s only work wheb you go over a bump, since the pavement in this game is just a flat surface.

      Sorry if you don’t like it.

      1. i do like it, that is why i pointed those observations to you; the shaking only appear in the 389 n w900. You are correct when you say that the pavement (and the roads in general) in game are just flat surfaces, no bumps, no bad shape roads, no nothing… its like floating more than driving…

        1. oXyDe.DRIVERS

          For other truck, only suspension work. Now the cabin yet :)

  2. Best physic so far! I love the cabin and truck physic on the road it feels much more realistic! Keep up the good work I can’t wait to see future updates. Is it on steamworkshop?

    1. oXyDe.DRIVERS

      Hi, not yet. But in the future maybe.

  3. Jhoanatan

    hi … hey I like your mod is very good but I do not like the movement in the cabin … but very good your work.
    I have a question I am making a mod to remove the autosave but it does not work for me (it would help that the uploads do not disappear in 32bit), any suggestions?

    1. oXyDe.DRIVERS

      The movement of the cabin is still in Work. It’s really hard to do it realistic.

      Thank you.

  4. Like the mod, would like to see the truck rock back and forth when going over bumps or when you tap on the brakes to lets say back up a trailer? Sometimes you get that rocking motion. Other than that keep up the great work!

    1. oXyDe.DRIVERS

      Thank you, I can do it, but not everyone will like that motion.

      But I’m still working on it, specially the cab movement.

      1. That’s what a truck does lol, nobody must the feeling of driving a real truck then.

Leave a Reply to Dr_JaymZ Cancel reply

Your email address will not be published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The reCAPTCHA verification period has expired. Please reload the page.