Physics Mods v 2.3 for ATS 1.6.x + – For Manual Drivers

Hi guys, This physics change the transmission feel and suspension.

Also, that is new with this update. You have the option to have Trucks Cabin Suspension. Should work with other truck. unless the other mod touch cabin and chassis files.

It only have two truck that are from SCS trucks only:
Peterbilt 389 SCS
Kenworth W900 SCS

It active the Cabin Suspension like a real one (I don’t know why they are deactivate.)
So when going on over bump or you just turning, the cabin will start to move, and suspension starting to bouncing around.

Still in work in progress for this new update !

_____________________________________________________

#For the transmission:

– The only thing is change is the clutch friction are decrease (was 0.5 now at 0.65) For Manual H shifter only.

– I also changed something about the torque that when you decrease the value, the torque of your truck will changed.
– For example, if you have 2500lb of torque, changing this value will not be the same, So what I did is put it back to 1.0.
– so you have the 100% of the torque number and change it for the Scaling of the Flywheel.
– The more heavier the flywheel is the more the RPM will drop slower.
– Like a stock flywheel than a Aftermarket lightweight flywheel. (Car related)

– For the Sequential and Automatics mode is still in Work in Progress.
– Value are not stock, So you might seen some change.
– Trying to make the transmission change smoother

#For suspension:

– Now the trailer and truck can roll and pitch separately at 30 degrees at both direction.
– What it mean is if the truck roll on a bump. The truck will roll itself only and not the trailer and the truck.
– The trailer will stay at his normal position (can pitch or roll so take care)

– The suspension are little bit softer than stock physics.
– That mean that the truck will re-bounce when going on a bump (No to much much than last time)
– That give it a little bit of realistic.

– Now you see the truck shake in the cabin when you go over a bump or something else

#Other Physics

– I also change the Mass of the truck and wheels.
– The Truck Mass was 2300 now is 1800
– The wheel mass of the truck was 300 now at 200.
– Two SCS Trucks that now have cab suspension. (option)

– Still in WIP !

The goal is that I want to make the “worst” physics to a “real feel” physics, I never drive a real truck in real life, but I can make it from Youtube Video.

Recommended to use with a steering wheel and clutch pedal, but you can use this mod with other controllers !

I can update the mod for you if you want !

Any bug or question ? Just tell me on Facebook: https://www.facebook.com/Jad.Gang97

Credits:
SCS, oXyDe.DRIVERS

DOWNLOAD 205 KB

2 thoughts on “Physics Mods v 2.3 for ATS 1.6.x + – For Manual Drivers

  1. I loved your previous one, but this one is a bit off.
    The body movement is pretty good, but it’s WAY to soft. When braking, the nose dips so hard, the front tires disappear into the fender well to the rims.

    I tried to modify it from .40 to .20 to try it out, but get an error when saving.

    1. oXyDe.DRIVERS

      Hi, Sorry I might make some mistake with the nunber with the front in some chassis.

      Stay tuned I will fix it in my next update for Automatics version :)

      -oXyDe.DRIVERS

Leave a Reply to coma Cancel reply

Your email address will not be published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The reCAPTCHA verification period has expired. Please reload the page.